ADAM Audio A44H Pair: High-performance nearfield monitor for professional audio with 4-inch midwoofers and 4-inch tweeters. Frequency Response: 39 Hz – 50 kHz, providing extended range for rich sound detail. Power: 90 W RMS (LF), 40 W RMS (HF) for clear, distortion-free audio even at high volumes. Connectivity: XLR & RCA inputs, perfect for most audio setups. Size: 23.3 x 14.7 x 24.3 cm. Weight: 5.4 kg each. Perfect for precise sound reproduction in your professional studio!TECHNICAL DATAGeneral DataDisplay: Front panel multi-colour LEDCabinet Design: Dual front portedCabinet Material: Vinyl wrapped MDF and painted MDF front panelMounting options: Threaded inserts on the bottom of the cabinet (4 x M8)Power consumption (max, idle, sleep): 220 W, 10 W, 3.5 WAC Input Voltage: 100 – 240 V, 50/60 HzPower Rating: 300 W max.Operating Conditions: -10° C to 40° C ( 14° F to 104° F); <75 % RH, non-condensingWeight: 9.7 kg (21 lbs 6 oz)Dimensions (Height x Width x Depth): 135 mm x 432 mm x 350 mm (5 3/8″ x 17″ x 13 3/4″)Warranty: 5 years (2 years warranty plus 3 years optional with product registration)Delivery Contents: A44H loudspeaker, power cable, Quick Start Guide Audio Input ConnectorsAnalog: XLR, RCAInput Impedance: 9 kOhm / 3.3 kOhmMax. Input Level: 19 dBu AmplificationWooferAmplifier Type: PWMPeak (10% THD, limiter deactivated): 110 WRMS (1% THD, limiter deactivated): 90 WTweeterAmplifier Type: Class A/BPeak (10% THD, limiter deactivated): 20 WRMS (1% THD, limiter deactivated): 15 W Control Options [via Network]Networking Connector: RJ45Connection Type: EthernetCommunication Protocol: OCA using standard IP dataControl Software: A Control (Windows and MacOS available)Room Adaption Options: Backplate, Extended, Sonarworks SoundID Reference integrationAdvanced Room Adaptation: 6 x PEQ, Level, DelayThird-party Calibration Compatibility: Import from Sonarworks SoundID Reference AcousticsFrequency Response @ -3 dB: 49 Hz – 41 kHzFrequency Response @ -6 dB: 46 Hz – 45 kHzCrossover Frequencies: 2.4 kHzMax. peak SPL per speaker at 1 m (sine bursts): 103 dB SPLMax. peak SPL per speaker at 1 m (IEC-weighted noise): 110 dB SPLMax SPL in full space at 1 m with sine bursts (average 100 Hz to 6 kHz) @ 3% THD (RMS): 103 dB SPLMax SPL in full space at 1 m with sine bursts (average 100 Hz to 6 kHz) @ 3% THD (Peak): 106 dB SPLMax SPL in full space at 1 m with sine bursts (average 50 Hz to 100 Hz) @ 3% THD (RMS): 95 dB SPLMax SPL in full space at 1 m with sine bursts (average 50 Hz to 100 Hz) @ 3% THD (Peak): 98 dB SPLDolby DARDT max SPL in full space: 114 dB SPLDolby DARDT max SPL in full space (bass managed): 118 dB SPL DriversWooferBasket Diameter: 2 x 4″Voice Coil Diameter: 1″ (25 mm)Cone Material: MLMTweeterType: X-ARTDiaphragm Area: 4 inch² (2420 mm²)Equivalent Diaphragm Diameter: 2″ (56 mm)Velocity Transform Ratio: 4 to 1Diaphragm Weight: 0.17 gWaveguide: HPS (rotatable)Waveguide Dispersion: 120° horizontal, 70° vertical Signal ProcessingAD converter: 24-bitInternal sample rate: 96 kHzDelay range, resolution: 0 – 10 ms, 0.1 msProtection: Independent peak and thermo limiters for each driver, and amplifier thermo limiters Control Options [via Backplate]Input Sensitivity: 0 dBu = 100 dB SPL at 1 m @ 0 dB level settingLevel: -12 dB to 12 dBInput Selection: Balanced, unbalancedVoicings: Pure, UNRRoom Adaption:Bass: 2, 0, -2, -4 dBDesk: 0, -2, -4 dBPresence: 1, 0, -1 dBTreble: 1.5, 0, -1.5 dBVisit item page https://www.adam-audio.com/en/a-series/a44h/
